At The Picket Fence with Vanessa Hunt

Where Ideas for your Home Meet Inspiration for your Heart

Drum Shade Chandelier Tutorial

DIY Fabric Drum Shade Chandelier Tutorial www.atthepicketfence.com

A few months ago I revealed my Dining Room Remodel.

One of my favorite features in my new dining room is my DIY Drum Shade Chandelier.

DSC_0362

In fact, many of you have commented or emailed asking me about the chandelier, so I thought it was about time to give you the low down on how you can make your own version of my Drum Shade Chandelier. You may remember that I started with this…

dining-room-2

Yep…that’d be no chandelier at all, since I had moved the original chandelier into my kitchen and gave it an update. You can read about that on my How-To Paint a Chandelier post. So, I was working with a clean slate.  And I was really drawn to something like this.

inspiration shade
Source

It’s gorgeous and I love it but, but I did not love the price tag! $200.00 just for the shade! I knew there had to be a way to make my own. I searched through Lowe’s and found a pendant light kit for $19.00 that I thought might work.

DSC_0293

The hardest part of this project was finding a fabric that I liked.  I didn’t want to make a mistake and purchase fabric that I ended up hating.  I finally found a fabulous and fun pattern at Hobby Lobby..and at 40% off it was a steal!

DSC_0362-001

I found a plain white drum shade at Garden Ridge for $10.00 and knew we were in business!

While, I usually like oiled bronze (and have used it for my kitchen light fixtures) I wanted to be daring and try something new and exciting.  I wanted…gold. gasp! I know. We’ve been led to believe gold is boring and outdated, but not the “new” gold. It’s soft and rich and pairs so beautifully with blue. I found the perfect color.

DSC_0290

I love this metallic gold from Valspar.  It sprays so smoothly and dries within seconds.  I swear I could spray anything that stood still long enough with this stuff!

The light kit comes with three extension rods depending on how far you want your fixture to hang down.  I determined two was plenty and rigged a contraption so that I could get a nice uniform coat on them.  It’s a nail in a board.  Fancy, huh?

DSC_0285

I took apart the chandelier (it helps to take a picture of it together before you take it apart…don’t ask me how I know this. :/ ) and sprayed every piece that was originally oiled bronze.

DSC_0648

Here you can see the completed pieces including a ceiling medallion that we ended up not using.  We ended up liking the simplicity of the original fixture.

DSC_0650

Next, I covered the shade.

DSC_0653

You will need to roll your shade along your length of fabric on the reverse side, using the seam on the shade as a guide of wear to start and stop for the proper length.  While rolling your shade you want to draw light lines about an inch wider than the shade width on each side.

DSC_0205

Once you cut your fabric along the lines, you will end up with a shape like this.  I then used spray adhesive and generously coated my shade and carefully rolled the shade along the fabric until it was securely attached, working out any wrinkles as I went.

I then trimmed off any access and neatly folded about a quarter of an inch of the overlapping fabric to make a nice finished edge and secured it with a bead of hot glue.  It’s impossible to avoid a seam but if done neatly it’s fairly unnoticeable and can be placed towards the back of your chandelier.

Then using hot glue I wrapped the fabric around the edges of the top and bottom of the chandelier, making a cut where the fabric met up with the crossbars on the shade.

DSC_0206

I knew that since this was hanging over the dining room table I would not want to look up and see the stark white of the inside of the shade, so I repeated the same step for cutting the fabric , minus leaving the additional inch of fabric, but instead wrapped it on the inside of the shade.

I trimmed off any access that I ended up with along the edges and glued them down.

DSC_0210

Here, even though the lighting is poor…is it even possible to avoid this when working at night…sigh…you can see the shade wrapped on the outside and the inside.  I then used a nice coordinating flat trim and hot glued it around both the top and bottom of the shade on the inside and outside for a nice clean finish.

Now you are ready to install your chandelier.

You will want to make sure your lighting element (the part the bulb screws in) is on the bottom of the fixture but you do not want to yet thread the cord though the extension rods or canopy and collars.  Thread the cord of the light fixture through the hole of the crossbars of your shade.  They will be at the top of the shade just like you would set it on a lamp harp.  The part that would hold the pendant shade will be on one side of the crossbars and the cord  will run through the top, with the threaded nipple running through the hole in the crossbars.

1-DSC_0307

Now you can thread your extension rods over the cord and reattach the canopy following the directions included with the kit.  I found that the threaded nipple that was included was long enough for my shade, but you can buy an inexpensive adapter kit if needed.

1-DSC_0296

Now you will need to hardwire your light fixture to the ceiling following the directions included with your fixture and using appropriate safety precautions.  It is easy to install your own light fixtures, but if you are unsure of what you are doing, please consult a professional electrician.  We don’t want anyone to get a shock!

We found this was a two person job due to the shade being attached to the fixture while installing.  It’s not heavy, just a bit awkward.  Now install your light bulb and make sure you have power to your new chandelier.  And that’s it!

DSC_0363-001

So what do you think? I know it’s not exactly like the inspiration shade, but it’s definitely similar and has the same effect! Of course with my entire fixture coming in at around $45 it was quite the savings! I really do like it and I think we’ll let it hang around for awhile…..get it…hang around. yep. I went there.

Let me know if you have any questions about making your own drum shade chandelier, I’d be happy to answer them!

DSC_0362

And as always thanks for “hanging around” with us…yep did it again…At The Picket Fence!

signature[7]

For more DIY Lighting Ideas see our Project Gallery!

Subscribe

Get the latest goodness straight to your inbox!

Reader Interactions

Comments

  13. I am so glad you posted this tutorial. I have been in love with your chandelier since you first posted your dining room. It looks very much like the inspiration…even better. I just love that fabric. Is there any issue with the fabric being on the inside of the shade (ie a fire hazard)? How difficult was it to have the fabric lie flat without any wrinkles? I would love to try this.

    Reply

  25. It really is a great chandelier! I think you made a good choice with the gold paint. The oil rubbed bronze just wouldn’t have looked as good with that fabric.

    I covered the lamp shades of the lamps in our living room, and I wish I had read your tutorial first. My seams are not nearly as neat, but at least I can hide them by putting them towards the wall!

    Reply

  27. Super cute Heather!! 🙂 As for the bead board ceiling in the kitchen- yes- we added it. I’ll share more about it and how we did it when I do the post of the before and after (if I remember lol!!)

    Reply

  33. WOW Heather- That is absolutely perfect. You did a great job on it and it fits the dining room perfectly. I am seeing a return to gold all over again. Things comes and go as far as metals are concerned. Soon, everyone will look at all the dark shades and wonder what they were thinking…lol xo Diana

    Reply

  34. Heather, This is so fresh and contemporary- I love it! I have a spare shade that came from our store as an extra when a lamp order came in. Guess what I’m gonna do with it? Great choice w/the lighting kit from Lowes. It is so much nicer than those cords that always hang wonky! 🙂 Sue

    Reply

  47. This is great. I’m curious if this is an ample amount of light for your dining room with only light in the fixture. I hope to do this project myself and I have no other light in my dining room so am curious if I would need to add a lamp or anything.

    Reply

    • Hi Holli,

      I’m glad you like the chandelier!

      A couple of things, I had the original chandelier on a dimmer and always kept it low (I’m just a low light in the dining room kinda person) so for us it works fine. In addition we have a buffet lamp that I pretty much always keep on because it’s close to our front door and I like to have a light near our foyer, between the two it has been plenty of light. That said, the pendant fixture does call for a lower watt bulb and only one so it’s not going to be bright like a chandelier with lots of light bulbs in it. One option that I might do when this bulb burns out is get one of the energy efficient ones that puts off even more light at a lower wattage. That could be an option for you.

      Let me know if you have any other questions!

      Heather

      Reply

  50. Beautiful chandelier! I love that you finished the inside of the shade, too. So much more polished.

    Btw, you need to change your wording in two places. You “trimmed the EXCESS fabric,” not the” “access fabric”. This has been the grammar police public service message; feel free to delete this comment once the edits are made!

    Reply

Trackbacks

Leave a Reply to Pam - diy Design Fanatic Cancel reply

Your email address will not be published.

Footer

Stay Connected!

Instagram

Privacy Policy